Shisha,or hookah, is a popular tool for smoking with fruity and aromatic flavors, and a good smoking experience depends largely on the quality of the charcoal used. Choosing and burning the right charcoal is very important to ensure the shisha stays lit well, provides a good taste, and does not produce excessive smoke. Here is a complete guide on how to burn charcoal effectively for shisha:
1.Choose the Right Type of Charcoal
There are two main types of charcoal used for shisha: coconut shell charcoal and briquette charcoal.
- coconut shell charcoal :More environmentally friendly and produces less smoke. Coconut shell charcoal also burns longer and more evenly.
- charcoal briquette : They are usually more affordable, but tend to produce more smoke and burn out a little quicker.
Choose the type of charcoal that suits your preferences, but for better quality and smoking experience, coconut shell charcoal is often the best choice.
2.Prepare Charcoal Burning Equipment
To burn charcoal, you will need the following tools:
- charcoal burner :It can be an electric charcoal grill (faster and easier to control) or a gas charcoal burner. If using a gas burner, be sure to do it in an open area to avoid smoke buildup
- pliers or tweezers :Used to place and move charcoal safely.
- filter : To ensure the charcoal burns evenly and safely.
3.Charcoal Burning Process
To burn charcoal effectively, follow these steps:
- Step 1: Heat the Charcoal Burner If you are using an electric charcoal burner, light it and let the grill heat to a sufficient temperature. Typically, an electric charcoal grill can reach a temperature of around 600°C in a few minutes. If using a gas burner, be sure to light the flame and wait until the burner is hot enough.
- Step 2: Place the Charcoal on the Burner Use tongs or pliers to place the charcoal pieces on the burner. Make sure the charcoal is not touching each other and there is space between the charcoal pieces for air to flow and burn evenly.
- Step 3: Let the Charcoal Burn Let the charcoal burn for about 5-10 minutes. Good charcoal for shisha should have a red-hot surface with a light layer of ash on top. Make sure the charcoal is completely burned before using it in shisha.
- Step 4: Use Carefully Once the charcoal is evenly burned, use tongs or tweezers to transfer the charcoal to the shisha container. Carefully place the charcoal on top of the foil or charcoal filter that is already attached to the head of the shisha.
4.Tips for More Effective Burning
- Don’t Use Half-Burned Charcoal: This can produce an unpleasant taste and interfere with the smoking experience. Make sure the charcoal is completely smoldering before using.
- Keep Charcoals Away from the Hole: If charcoals are too close to the hole, the smoke can be too hot and uncomfortable. Place charcoals in a more strategic location.
- Use Quality Aluminum Foil: Thin foil can wear out quickly, reducing the smoking experience. Use thicker foil for longer lasting durability.
5.Avoiding Common Problems
- Charcoal Not Lighting Well: Make sure you are using a hot enough charcoal burner and that the charcoal is completely dry.
- Excessive Smoke or Too Hot: This can happen if the charcoal is too close to the shisha or burning unevenly. Position the charcoal so that it does not produce too much direct heat.
- Unpleasant Taste: If the charcoal still contains chemicals or has an unpleasant odor, make sure to choose natural, high-quality charcoal, such as coconut shell charcoal.
Conslusion
Burning charcoal for shisha may sound simple, but with the right technique, you can get a more enjoyable and satisfying smoking experience. Choose quality charcoal, use the appropriate burner, and make sure the charcoal is evenly burned before use. With the right steps, your shisha session will be more enjoyable and free from technical problems. Good luck!.Looking for good quality charcoal and briquette?just contact us cocopowers.com.
